The FEC pump is a highly efficient and economical centrifugal pump, which meets the requirements of sanitary and gentle product treatment and chemical resistance. FEC is available in three sizes, FEC-5, FEC-10, FEC-25
The FEC pump consist of a standard motor, stub shaft, mechanical compression coupling, adaptor, back plate, impeller, pump casing and shaft seals.
The FEC pump is designed for CIP with emphasis on large internal rounding and cleanable seals.
The FEC pump has a stainless steel shroud for protection of the motor, and the complete unit is supported of four adjustable stainless steel legs.
The FEC pump is equipped with either and external single or a flushed shaft seal. Both have stationary seal rings in acid-resistant steel AISI 316 with sealing surface in silicon carbide and rotating seal rings in carbon.
The secondary seal of the flushed seal is a long lasting lip seal.
Product wetted steel parts : Acid-resistant steel AISI 316L.
Other steel part : Stainless steel AISI 304.
Finish : Semi bright.
Product wetted seals : EPDM rubber.
Max. inlet pressure : 1000 kPa (10 bar)
Temperature range : -10°C to + 140°C (EPDM)
Noise level (at 1 m) : 60 – 80 dB (A).
Flushed seal :
Water pressure : Normally atmospheric (max. 1 bar)
Water consumption : 0.25 – 0.5 l/min
Standard foot-flanged motor according to the IEC metric standard, 2 pole = 3000 rpm. at 50 Hz, IP 55, insulation class F.